Plastic Sheet Die
Custom Plastic Sheet Die die cutting forces a flat plastic sheet (or the flat edge of a 3-dimensional part) against a cutting edge formed into a die. The result is a plastic piece shaped like the die.
Plastic Sheet Die is normally faster and more cost-effective than other cutting or trimming processes such as routing. The trade-off is in the dimensional tolerances and edge finish of the part. A nominal tolerance for die cutting is +/- .020 inch, and it does not always produce a smooth, finished edge like routing. Routing tolerances can be significantly tighter, routinely achieving +/- .005 inch.
Typically, material being die cut is 1/8-inch thick or less.
Midland can produce custom Plastic Sheet Die parts from a wide variety of thermoplastic materials, although more brittle plastics such as acrylic may not yield a satisfactory result. We most frequently die cut these materials:
|Width of the die||500mm-5000mm|
|Thickness of the product||0.2-2mm|
|Choked flow rope||90°|
|Way of flow passage||clothes rack type|
|Heating type||heating inside|
|Heater element||stainless steel heating rod|
|Mode of connection||closed cycled connection|
|Fastening piece||12.9 high strength|
|Precision of polishing||Polishing precision of the stream surface of the die lip 0.03-0.04(μm)other parts is 0.04-0.05(μm)|
|Galvanization||the stream surface of the die head are treated by chrome treatment. Thickness 0.03-0.04(μm),hardness: 60-65Rockwellc,the chrome treatment thickness of the ektexine is 0.01-0.02mm.|
|Installation||according costumer’s request|
|Way of charging||central ring charging way|