Location:Home > News

Rubber extrusion melt pump

The rubber extrusion melt pump is a core supporting volumetric gear conveying equipment for rubber product extrusion production lines. It is designed specifically for elastic materials such as EPDM, SBR, NBR, etc. It can achieve stable conveying, pressurization, and precise measurement of high-temperature and high viscosity rubber melt, and is a key equipment to improve the precision and efficiency of rubber product production.

rubber melt pump

1、 Core Definition and Working Principle

Equipment attribute: It belongs to the rubber extrusion specific melt pump and is an auxiliary pressurization and metering device connected in series between the extruder and the die head.

Working principle: The working volume change formed by the precision meshing of the master and slave gears is used to forcibly transport high viscosity rubber melt, and the flow rate is strictly proportional to the pump speed.

Structural features: Adopting a blind spot free flow channel design, coupled with maintenance free spiral seals, to avoid rubber residue from staying and burning, and to meet the processing needs of heat sensitive elastomers.

2、 Core functions and technological value

Stable voltage and flow: Isolate the interference of uneven feeding and screw speed pulsation in the upstream extruder, control the outlet pressure fluctuation within ± 0.5%, and ensure uniform extrusion flow rate.

Precision measurement: The flow accuracy can reach 0.5-1%, and the weight deviation per unit length of the product is greatly reduced. It is suitable for the production of high-precision products such as sealing strips and medical hoses.

Material homogenization: During the gear meshing process, the rubber material is divided, sheared, and then combined to disperse agglomerated particles such as carbon black and improve the dispersion uniformity of the filler.

Cost reduction and lifespan extension: Undertake the main pressure building task, allowing the extruder to operate under low pressure and low temperature conditions, reducing energy consumption per kilogram of material processing by about 25%, while reducing wear on screws and barrels, and extending the overall lifespan of the machine.

rubber extrusion melt pump

3、 Mainstream technical parameters

Working temperature: Conventional models ≤ 350 ℃, high-temperature models can withstand 400 ℃.

Pressure range: inlet pressure 0~30MPa, outlet pressure up to 50MPa, allowable maximum pressure difference 25MPa.

Displacement specifications: covering 31.5CC~800CC, some customized models can reach 1200CC.

Suitable viscosity: It can transport high viscosity rubber melt up to 40000 Pa · s.

Core Material: The pump body is made of nitriding steel/high-temperature tool steel, and the gears are made of alloy tool steel, suitable for high packing and continuous 24-hour production conditions.

melt pump in extruder

Which rubber products are suitable for production

Rubber sealing strip: Improve uneven rubber dispensing and ensure consistent cross-sectional dimensions.

Rubber hose: Improve the uniformity of pipe wall thickness, reduce material breakage or core deviation.

Rubber profiles: Complex cross-section molding is more stable and has fewer surface defects.

High filling rubber production line: For formulas containing carbon black and mineral fillers, wear-resistant materials and reinforced bearing designs are available.

Email: sale@meltpump.com

WhatsApp: +86 158 3833 1071

Melt pump is your extruder’s best friend

CONTACT US

  • Tel: +86 371-67991755 / 67992755
  • E-mail: sales@battemachinery.com
  • whatsapp: +86 158 38331071
  • Mob: +86 15838331071
  • Address: No.11 Changchun Road, High & New Technology Development Zone, Zhengzhou, China.